Table of Contents
Inclusion #
New In-Box #
- Touch “Select” to initiate Inclusion Mode
- If the inclusion procedure is successful, “INCLUDED”, the node ID, and the Z-Wave connected status icon appear on the screen. If the procedure fails, “FAILED TO INCLUDE” appears on the screen.
- Your controller will indicate whether the thermostat was successfully added to its network. (Please refer to the user manual of your Z-Wave controller.)
Unpackaged #
Perform the same steps as New In-Box, after the Exclusion process has been performed successfully
Exclusion #
Factor Reset #
Press and hold “Menu” for 5 seconds
