Table of Contents
Inclusion #
New In-box #
To place in pairing mode, go to the Thermostat’s Main Menu, scroll down to the ZWave Install item. Press Select. You will then see ‘Add Thermostat to Z-Wave Network?’ Press the YES button to pair the device
Unpackaged #
Perform the same steps as New In-Box, after the Exclusion process has been performed successfully.
Exclusion #
When the controller is in exclusion mode, go to the Thermostat’s Main Menu, scroll down to the ZWave Install item. Press Select. You will then see ‘Remove Thermostat from Z-Wave Network?’ Press the YES button to unpair the device.