Inclusion #
New In-Box #
Follow the instructions on the Hab Installer page to add a device to the Z-Wave network.2. Once the controller is ready to add your device, press andrelease the Program Button to add it in the network.
Unpackaged #
Perform the same steps as New In-Box, after the Exclusion process has been performed successfully
Exclusion #
Follow the instructions on the Hab Installer page to add a device to the Z-Wave network.2. Once the controller is ready to remove your device, press andrelease the manual/program button on the smart dimmer toremove it from the network.
Factory Reset #
Press and hold the button for at least 3 seconds. The LED lightwill blink 5 times to confirm.NOTE: This should only be used in the event your networks primarycontroller is missing or otherwise inoperable.
Other Info #
External link –Â http://manual.zwave.eu/backend/make.php?lang=en&sku=14286/ZW1001&cert=ZC10-16125345